Aircraft Leak Test System

The ALTS is an easy-to-use & portable leak test system designed to perform leak rate tests of aircraft fuselages and components. Designed around the user, the ALTS ensures reduced set up times to perform tests. The ALTS’ digital instrumentation ensures great accuracy and reliability. The touchscreen controlled dual flow range design ensures accuracy and resolution for both large and small leak rates. The ALTS can be optioned with a portable leak rate monitor, to measure ultra-low leaks, as shown.

See Brochure
ALTS - image

Key Features

Touchscreen User Interface

  • Intuitive user interface
  • Push button range selection
  • Real time parameter display

Data Recording

  • USB enabled data recording
  • Customizable reports

Precision Pressure Regulation

  • Sensitive and precise pressure regulator

Typical Specifications

Power

110 VAC, 60 Hz

Flow

(User Configurable)

Low Range: 0 to 1.13 lbm/min
Accuracy: ±1% of Full Scale

High Range: 1.13 to 30.08 lbm/min
Accuracy: ±0.1% of Full Scale (
±0.25% of Full Scale (>6.92 lbm/min)

Physical

Steel Construction
L60” x H62“ x D30”
Weight: Approx 450 lb

Pressure

(User Configurable)

Range: Up to 30 psig
Accuracy ±0.03% of Full Scale
Resolution: 0.001 psi

Other Pneumatic Leak Rate Systems

SLM+

Static Leakrate Monitor Plus

The SLM+ measures a component's pneumatic leakage rate while under pressure using either the flow make-up or the pressure decay methods. This dual range monitor may be either wall or battery operated. Color touch screen-controlled operation with data logging.
SLM+ - Static Leakrate Monitor Plus

SLM

Static Leakrate Monitor

The SLM is an economical unit used to measure a component's pneumatic leakage rate while under pressure using either the flow make-up or the pressure decay methods. This single range monitor may be either wall or battery operated. Color touch screen-controlled operation with data logging.
SLM - Static Leakrate Monitor